Graham-Field Lumex Padded Tub Transfer Bench

Description

Graham-Field Lumex Padded Tub Transfer Bench is designed to provide assistance to those having difficulty stepping over bathtub walls. The side support arm assists in lateral transfer and is reversible to fit any bathroom design, while the padded seat and back provide a traditional shower chair design. The comfortable padded seat and back are waterproof and easy to clean and provides a warmer bathing experience than inexpensive plastic seats.

Graham-Field Lumex Padded Tub Transfer Bench Features

• Transfer Bench is comfortable, cushioned seat and backrest are water-tight
• Anodized aluminum frame is lightweight, durable and rust-resistant
• Seat height is adjustable in 1″ increments
• Reversible to accommodate any bathroom
• Knock-down design makes transporting easy
• Quick and easy tool-free assembly
• Maximum Weight Capacity 300 lbs

 

What to buy with Transfer Bench

• Graham Field Lumex Everyday Hand Held Shower Head
• Graham-Field Lumex Everyday 7 qt Commode Pail
• Graham-Field Lumex Grab Bar

 

How to use Graham Field Lumex Transfer Bench?

 

• Attaching the Leg Extensions:
  1. Place the frame on its side on a level surface
  2. Attach leg extension with suction feet to the frame on the same side as where the support arm will be. Attach leg extension with flange tips to frame on the opposite side of the frame.
  3. The transfer bench legs with suction feet should be the 2 legs that are to be placed inside the tub. Note: Ensure leg extension push buttons protrude fully through plastic guide holes.
• Attaching the Backrest:
  1. Determine the side on which the backrest should be mounted by knowing which direction the user will face when sitting on the bench in the tub
  2. Position the bench upright on a level surface
  3. Locate the channel (4 each) on the underside of seat. Align backrest support tubes with channel guides.
  4. Slide backrest seat support tubes through channel guides until seat support tube push buttons protrude fully through channel guide holes.
  5. Slide back support on to the seat support tubes until the push buttons protrude fully.
• Attaching the Support Arm:
  1. To attach the support arm, position the sear arm against the leg frame and slide the armrest tubing into the tube openings until it clicks into place. Make sure that the push buttons fully protrude through the holes in the  bracket. Note: An audible “click” will be heard
  2. To remove the  support arm, depress the push buttons and pull up. Note: The end with the support arm and suction feet is the side that should be inside the tub.
• Adjusting Leg Height:
  1. Depress the height adjustment button and slide the lower leg upward or downward until the height adjustment button clicks into place in the desired hole.
  2. Repeat for other  3 legs. Caution: Ensure that all 4 legs are adjusted to the same height, and that all height adjustment buttons protrude fully through adjustment holes before use.
• Using Your Transfer Bench:
  • From a seated position (Such as a wheelchair):
    1. Place your wheelchair next to the bench, facing the front of the  bathtub
    2. Engage wheelchair locks
    3. Transfer your torso to the transfer bench first, and then lift your legs into the tub. Move slowly to prevent injuries.
    4. After bathing, lift your legs out of the  tub first, then your torso.
  • From a standing position:
    1. Sit on the side of the transfer bench that is outside of the tub
    2. Extend  your arms to grab the support arm of the bench and slide your body over onto the bench. Lift each leg over the tub slowly.
    3. Position yourself to a comfortable position in center of the  bench.
    4. After bathing, lift your legs out of the  tub first, then your torso slowly
  • 300LB CAPACITY